Technimount System Bracket Pro Serie 110 User Manual Download Page 12

Page: 12 / 40

Return To Table of Contents

BP110 UG 202002-R01

www.technimount.com

Introduction

Product Name

Bracket Pro Serie

110

Compatibility of Medical Device

Monnal T60 Ventilator from Air Liquide

Environment of Usage

EMS (Ground & Flight) – Hospital/Clinic, Military

Device Section Material

High-Density Aluminum with Gray Anodized Finish – Acetal Feet

Bottom Disc Section Material

Aluminum with Stainless Steel Insert and Peek Cushions

Anti-Rotation Back Disc Material

High-Density Aluminum with Gray-Anodized Finish

Temperature of Usage

- 35° C @ 45° C (Direct Conduction)

Impact Resistance – Ground - USA

SAE J3043 (30 G) Plus 10% Safety Factor

Impact Resistance – Ground – EU

DIN EN 1789 (10 G)

Impact Resistance - Flight

FAA – FAR -DOT 27.561 & DOT 27.562 up to 20G

Medical Device Retaining System

Device Retained on Platform with Junction and Back Plates

Retaining System

2 Locking Discs – Standard Bottom Section – Anti-Rotation Back Micro Disc

Transportation Compatibility System

•

Compatible with Technimount’s Standard Surface Base

•

Compatible with Technimount’s Stretcher Safety Arm System For

Stryker Cots (PowerPro – XT and Mx-Pro)

•

Compatible with the Floor Mount Platform (Flight)

•

Compatible with Wall Mount System (Micro Base System)

•

Compatible with the Safety MD Transporter

Features

•

Robust Mounting Solution for EMS/CCT/ALS Transport

• Access to all Connectors and Accessories

• Retractable hooks for Temporary Transport Between Hospital and

Ambulance

•

Fits with the Carrying Case System without Modification

Physical Overall Dimensions

Length 10.81 in., Width 6.94 in., Height 12.07 in.

Weight (Bracket Only)

Bracket Only – 5.79 lbs

Bracket with Device - 14.6 lbs

Part Number

Bracket without Back Hooks - 1300-10-MT

Bracket with the Back Hooks - 1300-11-MTBH

Summary of Contents for Bracket Pro Serie 110









































Search results

Summary of Contents for Bracket Pro Serie 110

Reviews:

Related manuals for Bracket Pro Serie 110

Brands by name

Popular brands

Technimount System Bracket Pro Serie 110, User Manual

Search results

Summary of Contents for Bracket Pro Serie 110

Reviews:

Related manuals for Bracket Pro Serie 110

Brands by name

Popular brands