32
BP75 UG 202110-01
Maintenance Guide
INSPECTION PROCESS AND SCHEDULE
MAINTENANCE PROGRAM
The following inspection routine and schedule is intended as a general guide for preventive maintenance of the
Bracket. Factors such as weather, environment, geographical location, and individual usage will necessitate different
maintenance. If you are unsure as to how to perform these maintenance inspections or at what interval to perform
these inspections, please contact your Technical Support Team at
. Check each routine
and replace damaged or worn out parts if necessary.
Follow timetable below for maintenance (either in months (M) or hours (H)), in accordance with your Service’s current
maintenance practices and protocols.
ITEM
ROUTINE
1 M
OR
2 H
3 M
OR
6 H
6 M
OR
12
H
12
M
OR
24
H
Bracket
9
Inspect Bracket
▪
Inspect the screws
▪
Inspect the Red Quick Release Mechansim
▪
Ensure it is working properly and there are no
particles, obstacles, or debris
▪
Inspect back screws
9
Verify both discs
▪
Verify that there is no damage or dirt on the discs
and there are no loose screws
▪
The discs can be easily inserted into and removed
from their respective bases (Standard Surface
Base or Micro Base)
▪
The Standard Disc turns well inside the Standard
Surface Base
9
Do a visual inspection for the Bracket to ensure there
is no damage or chemical attack
9
Inspect the Quick Release Mechanism to ensure there
is no damage and the mechanism functions properly
by pulling and releasing
X
