Technimount System BRACKET PRO 75 Series User Manual Download Page 35

Page: 35 / 40

www.technimount.com

BP75 UG 202110-01

Return To Table of Contents

Maintenance Guide

REPLACEMENT PARTS

The parts and accessories listed are all currently available for purchase. Some of the parts identified on the assembly

drawing parts in this user guide may not be individually available for purchase. Please call Technimount Customer

Service : +1.888.639.2758 or at

[email protected]

for availability and pricing.

DESCRIPTION

PART NUMBER

Silver

-Anodized Locking Assembly Block

Without

Bag Kit: (Includes Protection Rubber, Locking

Assembly Block and 2 Phillips Stainless Steel Pan Head Screws with Nylon Patch 10-32 X 1-2 in)

TCM-044-014

Black

-Anodized Locking Assembly Block

With

Bag Kit: (Includes Protection Rubber, Locking

Assembly Block and 2 Phillips Stainless Steel Pan Head Screws with Nylon Patch 10-32 X 1-2 in)

TCM-044-019

Screw Kit for the Locking Assembly Blocks with or without Bag (Includes 2 Phillips Stainless

Steel Pan Head screws with Nylon Patch 10-32 X 1-2 in)

TCM-VR-999-050

Label – Brand Name

942-00-UN

Label – Instructions in English

960-00-EN

Label – Instructions in French

960-00-FR

Summary of Contents for BRACKET PRO 75 Series









































Search results

Summary of Contents for BRACKET PRO 75 Series

Reviews:

Related manuals for BRACKET PRO 75 Series

Brands by name

Popular brands

Technimount System BRACKET PRO 75 Series, User Manual

Search results

Summary of Contents for BRACKET PRO 75 Series

Reviews:

Related manuals for BRACKET PRO 75 Series

Brands by name

Popular brands