9
MULTI-FUNCTION ELECTRIC OVEN
With different heating elements controlled
using a selector switch and regulated by a
thermostat, this oven offers various cooking
methods.
There are three principle sources of heat:
a)
Forced heat diffusion (fan oven).
b)
Spontaneous heat diffusion (static
oven).
c)
Infra-red rays (grill).
Starting from the 0 (off) position and turning
the selector knob clockwise, the following
settings are obtained:
- symbol
settings are obtained:
:oven light and red light on, fan
running.
- symbol
:thegrill function is on,the ther-
mostat knob must be on the maximum
temperature setting.
- symbol
temperature setting.
:fan oven cooking on one or two
levels, the oven temperature is regulated
by means of the thermostat knob.
- symbol
by means of the thermostat knob.
: the fan grill function is on; the
grill, the top heating element and the fan
inside the oven are all in operation.
- symbol
inside the oven are all in operation.
: the bottom heating element is
one. The oven is heated below only.
- symbol
one. The oven is heated below only.
: the top and bottom heating
element are on,the oven temperature is re-
gulated by means of the thermostat knob.
- symbo
gulated by means of the thermostat knob.
: full fan cooking is one; the top
and bottom heating elements and the fan
inside the oven are in operation.
In all positions except zero (0) the red warn-
ing light and the oven light are on.
NOTE:
The yellow warning light comes
on according to thermostat variations.
Before putting food in to be cooked, the
oven should be pre-heated for at least 10
minutes.
on
knob pointer is turned to the
one or
the oven temperature is
For the user
AU
USE OF THE TOUCH TIMER 3 KEYS
The first start up
The numbers and the
A
letter on the
display are blinking when the oven is
switched on for the first time, or after a
power cut: the appliance cannot be
operated in this condition.
To set the hour and/or to enable the
appliance to operate press the
M
key for
at least 2 seconds: the
A
letter turns off
and the numbers now are steady on the
display.
The dot (3) starts blinking: press the
-
or
+
key to set the hour.
The hour is accepted by the programmer
just few second after having released the
key.
N.B.
the appliance can be correctly used for
cooking only when you will see on the
display the symbol (2).
The symbols on the display
1
A*
Automatic programme is working.
(* in some models there is the writing "
Auto instead of A)
2
The appliance is ready for manual use
(not automatic).
3
•
When blinking, the programmer is in
setting hour mode.
4
Timer set.
5
-
Decreasing numbers when setting the
timer. Also for choose your desired sound
level (3 levels available)
6
M
"Mode" key to access the
programming options of the
programme.
7
+
Increasing numbers when setting the timer.
