Installation
Instructions for installation
This appliance shall be installed only by authorised persons and in
accordance with the manufacturer's installation instructions, local
gas fitting regulations, municipal building codes, electrical wiring
regulations, AS 5601 - Gas Installations and any other statutory
regulations.
IMPORTANT: Installation, assembly and gas/electrical
connections must be carried out by authorised personnel.
Data Label - The Data Label is located on the rear of the appliance
or in the storage drawer (where fitted). If the label is attached to the
rear of the appliance, a duplicate Data Label is supplied to adhere
in an accessible area next to the appliance. This appliance is
suitable for Natural Gas and Universal LPG; ensure that the
available gas supply matches the Data Label and the gas type
label.
Ventilation - Ventilation must be in accordance with AS5601 - Gas
Installations. In general, the appliance should have adequate
ventilation for complete combustion of gas, proper flueing and to
maintain temperature of immediate surroundings within safe limits.
Before any procedure, it is important to check that the appliance is
DISCONNECTED from the electrical mains. The Manufacturer
declines all responsibility for any damage deriving from
installations in breach of the regulations in force or from failure to
comply with these installation instructions.
28
