CONNECTING POWER
Plug the DC power jack of the adapter into the DC socket in the DPF.
Plug the power adapter into the mains point. Switch on at the mains.
Switch the ON /OFF switch on the frame to ON.
• You can leave the power switch on, and use the
button on the
handset to turn the frame on or set it to Standby mode.
• To turn off the power off completely, slide the switch to OFF.
INSERTING MEDIA
(Refer to the drawings opposite).
Insert the SD/MMC/MS/ card
into the 3-in-1 card slot with the
metal contacts facing the display.
Insert the CF card
with the front label facing
away
from the screen.
When inserting a card:
Align the card carefully with the slot and
gently push it all the way in.
• NEVER force a memory card into the slot.
• To remove a card, pull it out slowly.
Insert the USB drive
as shown in the above drawing.
Notes:
•
If only one device (one card or USB drive) is connected before
the frame is switched on:
when the Frame is switched on , connect-
ing a second device has no effect.
• I
f a USB drive and
either
a SD card or a CF card are connected:
when the Frame is powered up the
USB drive
will be selected.
• I
f a USB drive, a CF card and a SD card are all connected
: when
the Frame is powered up the
CF card
will be selected.
•
If no card or USB drive is connected:
when the Frame is
powered up the frame’s internal memory will be selected.
USB DRIVE
SD/MMC/MS
CARDS
CF CARD
Page 8
