User Guide
9
Installing batteries in the remote control
1. Remove the battery compartment cover at the rear of the remote
control by depressing the retaining clip.
2. Install the supplied AAA batteries as shown, ensuring the polarity
matches that shown in the battery compartment.
3. Replace the battery compartment cover.
Using the remote control
To use the remote control point it at the TV and press the required buttons.
You must be within 6 metres and at an angle of less than 30 degrees from
the centre of the TV.
Note: Sunshine or other strong light sources may interfere with the signal
from the remote control. In this situation turn the TV set away from
the light source.
The remote control has a small torch at the front. To operate this, press and
hold the
LIGHT
button.
WARNING! DO NOT LEAVE BATTERIES IN THE REMOTE CONTROL FOR EXTENDED
PERIODS AS THEY CAN LEAK OR CORRODE CAUSING DAMAGE TO THE REMOTE
CONTROL. CHECK THEM PERIODICALLY AND REPLACE THEM AS REQUIRED.
WARNING! DO NOT MIX BATTERY TYPES. WHEN INSERTING BATTERIES, REPLACE
ALL BATTERIES AT THE SAME TIME. DO NOT MIX OLD AND NEW BATTERIES.
WARNING! EXHAUSTED BATTERIES MUST BE TREATED WITH CARE AND DISPOSED
OF ACCORDING TO ANY SAFETY OR RECYCLING REGULATIONS IN FORCE IN YOUR
LOCAL AREA. NEVER DISPOSE OF BATTERIES INTO GENERAL WASTE, OR FIRE.
LCD32-407B.indd Sec1:9
LCD32-407B.indd Sec1:9
14/11/2007 16:02:19
14/11/2007 16:02:19
