Technika DAB121, Owner'S Handbook Manual

Page: 12 / 16

10
SETTING THE ALARMS
SETTING THE ALARMS
You can set two completely separate alarm times (ALARM 1
and ALARM 2) and activate either or both of them to wake
you with a buzzer or radio. You can also pre-set the station
preset and volume settings that the alarms will wake you
with.
The alarms are set from within the ‘Alarm’ option of the
Settings Menu.
NOTE:- You must complete all settings before leaving the
menu or your changes won’t be saved.
Setting the Alarm:
Switch on the radio (Alarm settings cannot be changed •
when set to Standby).
Press the
• MENU button.
‘Autoscan’ will appear on the display.
Press the •
O
button once to step to the ‘System’ menu
option.
Press the
•
VOLUME/SELECT
control.
Press the •
P
or
O
button to step to the ‘Alarm’ menu
option.
Press the
•
VOLUME/SELECT
control.
‘Alarm 1 Setup’ will appear on the display.
Press the • VOLUME/SELECT control to begin setting
Alarm 1 or press the
P
button before selecting to
choose Alarm 2 setup.
Alarm 1 Wizard is now displayed.
The alarm is now set in the sequence shown on this page.
NOTE: Press the
MENU
button at any time to exit alarm
setting, leaving the settings unchanged.
To make a change to a setting:
Press 1. the
P
or
O
button to scroll through the options
available for a setting (or times when clock setting).
When you have finished changing a setting, press the
2.
VOLUME/SELECT
control to confirm the setting and
move on to the next setting in the sequence.
Repeat the previous two steps to change each setting as
3.
required.
*NOTE:- When changing the Alarm radio preset setting,
choose the ‘Last listened’ option to wake to the last station
you played before setting the radio to Standby.
Saving alarm settings:
Your alarm settings are automatically saved when you
complete the last setting and press the
VOLUME/SELECT
control.
The display will confirm with the words ‘Alarm saved’.
Waking to the alarm:
Once you have set the alarm with your required time and
wake-up mode, set the radio to Standby.
If the alarm is active, the alarm symbol will show on the
display -
ALARM SETTING SEQUENCE