background image

10

Wall mounting

IMPORTANT - Before drilling any holes in the wall ensure you are not drilling 
where there could be any electrical wires, water or gas pipes.

1) Remove the four screws located at the back of the TV set.

2) The wall mount can now be easily attached to the mounting holes, located 
on the back of the TV, using the same four screws removed. 

For VESA wall mounting information please refer to the Technical 
Specifi cation page.

For optimum viewing, if wall mounting the TV higher than eye level, the TV should be tilted downwards 
so that the TV’s screen is ‘face on’. See fi g 1 and 2.

Important – If wall mounting this TV, only use the screws already provided in the wall mounting holes 
located at the back of the TV, using other screws which are longer could cause irreparable damage to 
internal parts.

Securing the TV to a wall/wall mounting

SECURING THE TV TO A WALL

 

Note - Please ensure that children do not climb on the TV set.

Securing the TV to a wall

For maximum security in the home, when using a TV with its stand, anti-tip straps should be fi tted. These 
are available from supermarket websites and other websites and are an easy, inexpensive and effective 
way of ensuring your TV stays safely upright. Straps are designed to be attached to the rear of the TV and 
then tethered to the wall or the furniture the TV is stood on, these are fi tted as follows.

The Royal Society for the Prevention of Accidents is urging people to take care with fl at-screen televisions. 
RoSPA stated in 2010 that “Toddlers are particularly at risk of pulling fl at-screen televisions on to 
themselves. They are unsteady on their feet and are attracted by colourful television images.”
The risk is increased as televisions become lighter.

A)

 Using one or both of the top wall-mounting 

holes and screws fasten one end of the fastening 
cord/s to the TV. (the screws are already supplied in 
the wall mounting holes)

B)

 Secure the other end of the fastening cord/s to 

your wall. (you will need screws/fi xings suitable 
for your wall type - available separately from most 
DIY stores).

fig 1

fig 2

TV

TV

Viewing angle

Viewing angle

INCORRECT

CORRECT

User Guide - Technika - 22-212D.indd   Sec1:10

User Guide - Technika - 22-212D.indd   Sec1:10

19/06/2015   16:03:05

19/06/2015   16:03:05

Summary of Contents for 22-212D



























Reviews: