TECHNIKA PRO LCD24-620, User Manual

Page: 28 / 56

The VGA mode supported up to 1 920 X 1080 @75Hz(for 24 "), you can use this unit as a
multimedia PC monitor. When this unit works in VGA mode, the following setup can
be done.
Press [SETUP] button to enter main section. Press [ ] button to select sections and then
press [ ] button or [OK] button to enter. If all is complete , please press [SETUP] button twice to
exit and your setup data will be saved automatically.
Select VGA SETTING item to adjust such
parameters as Contrast, Brightness,
H-offset, V-offset, Frequency, Phase,
Auto Adjust.
V G A S E T T I N G
NOTE
When your PC goes into standby mode, the screen will show
as right side. This unit will go into sleep mode if no signal
input
for 5 minutes. In this mode, the indicator will remain
green, and the screen will turn off. You can wake it up by
waking up your PC or pressing [SETUP] or [SOURCE]
button on the remote control.
VGA
NO SIGNAL
1 : 50
VGA SETTING
Brightness
V-Offset
H-Offset
Select Return
SETUP
Enter
Contrast
OK
Frequency
Phase
Auto Adjust
75
50
50
50
0
60
S O U N D
Sound Mode item can be changed between
Music, Film, News, User.
Select SOUND item to adjust sound parameters.
You may adjust Sound Mode, Treble, Bass,
Balance, Auto Volume and Surround Sound.
Auto Volume item enables you to adjust Off or On
for control volume automatic.
Surround Sound item enables you to select Off or
On for surround sound.
SOUND
Select Return
SETUP
Trebl e 75
Bass
50
Balance
50
Auto Volume
SurroundSound
Standard Sound Mode
Adjust
Off
Off
VGA Menu Setup
28
24" HD Ready 1080p DVD LCD TV User Guide
Downloaded from www.Manualslib.com manuals search engine