Technik-Plus FRONT-TURBO, Instructions Manual

Page: 9 / 29

9
Changing of seed roll
TP-TURBO-JET Super 6/10
1. Remove the covers for the gears!
2. Remove the gears – Remove marked *split pin! (Pict. 1)
3. Remove the bearing with the 3 screws (See markings-Pict. 1)
5. Open the bottom flap and remove the lamella. (Pict. 2)
6. Push out the seed roll from below and fit the correct seed roll from outside.
TAKE CARE TO THE AXIAL TOLERANCE!
8. Fix the bearing,
Mount the geards,
Mount the split pin,
Mount the cover for the gears.
9. Check the axial tolerance
(When the bottom flap is opened)
10. Check after 2 hours
the screws and the split pin.
4. Fit the correct seed roll. Take care to the axial tolerance!
5. Mount the bearing.
6. Mount the split pin.
7. Mount the cover with the two nuts.
The position oft he spreader plates can be
horizontal or vertical.
Mounting the hose on the spreader plate.
Pict. 2
Pict. 3
1. Open the tow nuts and remove
the cover.
2. Remove safety split pin. 3. Remove bearing and remove the
seed roll.
If necessary open the
bottom flap and
remove the lamella.
Push out the seed roll
from inside.
Either
horizontal
Or vertical