Technics SX-KN7000EB, Service Manual, Page: 33 / 160

-
The operation status of each input action part can be confirmed. If the part is
operating properly, “OK” is shown, excluding the Expression Pedal. (refer to Fig.28
)
-
When a keyboard key is pressed, the corresponding pitch and velocity aftertouch is
displayed (only as long as the key is depressed).
-
The respective statuses for other input action parts are displayed. (Analog parts are
shown as numerical values from 0 to 255, and switches are shown as ON or OFF.)
-
If the display fails to change when the part is operated, or if the change is abnormal,
it may indicate a defective part.
8.8. MIDI IN/OUT test
Fig.29
-
First, set the COMPUTER terminal switch to MIDI.
-
Use a MIDI cable to directly connect the MIDI IN and MIDI OUT terminals.
-
When a keyboard key is pressed, the transmitted and received data are compared
33