Technics SA-GX505, Service Manual

Page: 44 / 48

SA-GX505
Display section
FM stereo indicator (STEREO)
This indicator
automatically illuminates when an FM stereo
broadcast is being received.
It will not illuminate if the FM mode selector is
monaural mode.
Spectrum analysis/parametric EQ level display
(SPECTRUM ANALYZER/PARAMETRIC
This display shows the analysis level
display” “D
O
, display”) equalization level.
Quartz-lock indicator (QUARTZ LOCK)
This indicator illuminates when “nit is tuned precisely a
broadcast station.
Channel display
This display shows the channel number selected by one of
buttons.
this display shows the channel number about 3
seconds during memory scan operation.
Band indicators (AM, FM)
Indicates the selected band.
Memory indicator (MEMORY)
This indicator illuminates when the memory button is pressed.
Memory scan indicator (M. SCAN)
This indicator illuminates when memory scan button is
pressed.
Audio input selector/frequency display
(INPUT SELECTOR/FREQUENCY)
Displays selected source or frequency.
Tape indicator (TAPE)
This indicator will when the is
pressed.
VCR display (VCR)
Displays the selected VCR.
Loudness indicator (LOUDNESS)
This indicator will illuminate when loudness switch is
pressed.
Muting indicator (MUTING)
This indicator will illuminate when muting (on the
transmitter) is pressed.
Center mode indicators
These indicators the center mode selected by the center
mode select button.
Rear/center level indicator
Displays the level adjusted by center speaker level
adjustment button or speaker adjustment
Test signal indicator TEST)
This indicator illuminates when the test signal button is
pressed in the Dolby
Surround mode and the
Dolby 3 stereo mode.