http://servis-manual.com/
5.4 Deck 2 mechanism check
TOP
PREVIOUS
NEXT
1. Press the Deck 1/deck 2 select button to change the flashing Deck 1 indicator to Deck 2. Refer
to
Fig. 5-3.
2. Press the Deck 2 cassette holder open button to open the Deck 2 cassette holder. Refer to
Fig.
5-3.
3. Insert a metal tape into the Deck 2 with an intact erasure prevention tab on the right side.
4. Close the Deck 2 cassette holder.
5. Press the Fast forward button. Refer to
Fig. 5-3.
/(Tape fast forwards for about 2 seconds then
stops.)
6. Open the Deck 2 cassette holder and turn over the metal tape. (intact erasure prevention tab on
the left side.)
7. Close the Deck 2 cassette holder.
8. Press the Rewind button. Refer to
Fig. 5-3.
/(Tape rewinds for about 2 seconds then stops.)
9. Open the Deck 2 cassette holder and replace the metal tape with a CrO2 tape.
10. Close the Deck 2 cassette holder.
11. Press the PLAY button. Refer to
Fig. 5-3.
/(After TPS operation and check, the tape stops.)
12. Open the Deck 2 cassette holder and replace the CrO2 tape with a normal tape.
13. Close the Deck 2 cassette holder.
14. Press the Record pause button. Refer to
Fig. 5-3.
/(No record operation.)
15. Press the STOP button. Refer to
Fig. 5-3.
A mechanism error code is displayed. Refer to Table
5-1. Each time the STOP button is pressed, the fault items are displayed in sequence.
Fig. 5-3.
20. 10. 2004
file://C:\Documents%20and%20Settings\Admin\Plocha\SCHÉMATA\VIDEA\PAN...
