SNMP COMMANDS
982
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
snmp group modify
Modify a access group.
SYNTAX:
snmp group modify
groupname = <{SU_Group|V1ROGroup|V1RWGroup|
Basic_Group|Extended_Group|WanAdmin_Group}>
[contextname = <{""}>]
securitymodel = <{snmpv1|snmpv2c|usm}>
securitylevel = <{noAuthNoPriv|authNoPriv|
authPriv}>
[readview = <{V1View|View_all|basic_readview|
WanAdmin_readview|extended_readview|
WanAdmin_writeview|extended_writeview}>]
[writeview = <{V1View|View_all|basic_readview|
WanAdmin_readview|extended_readview|
WanAdmin_writeview|extended_writeview}>]
[notifyview = <{V1View|View_all|
basic_readview|WanAdmin_readview|
extended_readview|WanAdmin_writeview|
extended_writeview}>]
[storage = <{other|volatile|nonVolatile|
permanent|readOnly}>]
where:
groupname
Configure a name of an access control group.
REQUIRED
contextname
Configure a context name used to match the context name
in a management request.
OPTIONAL
securitymodel
Configure the security model of the access control group to
be modified.
REQUIRED
securitylevel
Configure the security level of the access control group to
be modified.
REQUIRED
readview
Configure a view name identifying the view subtrees
accessible for read requests.
OPTIONAL
writeview
Configure a view name identifying the view subtrees
accessible for write requests.
OPTIONAL
notifyview
Configure a view name identifying the view subtrees from
which objects can be included in notifications.
OPTIONAL
storage
Configure the storage type.
OPTIONAL
nickdj.co.uk