MBUS COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
731
mbus client config
Modify client parameters
SYNTAX:
mbus client config
[writelock = <{enabled|disabled}>]
[wlgetimeout = <number>]
[wlidletimeout = <number>]
[path = <quoted string>]
[type = <{indexpath|keystrpath}>]
[id = <number>]
where:
writelock
Get/release mbus writelock
OPTIONAL
wlgetimeout
Writelock get timeout in seconds (forever=-1,
*default=nowait=0)
OPTIONAL
wlidletimeout
Writelock idle timeout in seconds (forever=-1, *default=30)
OPTIONAL
path
Fully qualified mbus path
OPTIONAL
type
Path type (default = indexpath)
OPTIONAL
id
sessionid to use
OPTIONAL
nickdj.co.uk