ETH COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
391
eth bridge vlan ifadd
Add bridge interface to virtual LAN.
SYNTAX:
eth bridge vlan ifadd
name = <{default|wan|dmz|guest}>
intf = <{OBC|ethport1|ethport2|ethport3|
ethport4|WLAN|virt|vdsl2}>
[untagged = <{disabled|enabled}>]
where:
name
The VLAN name.
REQUIRED
intf
The name of the bridge interface to add to the VLAN.
REQUIRED
untagged
Enable/disable interface as untagged for this VLAN.
OPTIONAL
nickdj.co.uk