12
TouchScreen TCA 400 Getting Started Guide – Installation
Arming the System from Touchscreen
Disarming the System
Tap the button located below
the countdown timer and Arm Mode.
During the Entry Delay, Touchscreen
display changes to announce the number
of seconds before the alarm goes off.
1
1
2
2
Touchscreen displays the countdown timer
along with a keypad.
Enter your Keypad Code to stop the
arming process.
Touchscreen beeps audibly once every
second, until the last 10 seconds when it
beeps twice a second.
When you arm the system, the screen displays a countdown of the number of seconds until the Exit
Delay is over. You can choose to cancel the arming process.
To cancel the arming process:
If a valid keypad code is not entered by the end of the Entry Delay period, an alarm sounds. From
the time an alarm sounds, for most reasons, you have 30 seconds to enter a valid keypad code to
disarm the system and prevent an alarm being sent to the central monitoring station. This is called
the Alarm Transmission delay or the Abort Window.
The Alarm Transmission Delay is a required period that prevents a report to the central monitoring
station if an alarm was triggered innocently.
When you enter an armed premises, an Entry Delay period starts:
Summary of Contents for TCHT2AA0
Page 24: ...Issued Date 09 08 2018 ...
