manualshive.com logo in svg

Technicolor MediaAccess TG789vn, Setup And User Manual

Share
Download
Technicolor MediaAccess TG789vn Setup And User Manual Download Page 73

65

7 SAVING ENERGY

DMS-CTC-20101206-0033 v1.0

7 Saving Energy

Code of Conduct

To prove its commitment to protect the environment, Technicolor has signed the Code of Conduct, a global agreement to 
reduce the power consumption of broadband access devices.

For more information, see 

“7.1 Code of Conduct” on page 66

.

Technicolor power saving innovations

To further reduce the power consumption, Technicolor has developed the 

ECO Manager

. This system constantly monitors 

the services provided by the MediaAccess Gateway and automatically switches unused services to an ECO-friendly state. 
For more information, see 

“7.2 ECO Manager” on page 67

.

Next to this automated tool, you can also choose to manually disable services that you will not be using. For more 
information, 

“7.3 Manually Switching Off Services to Reduce Power” on page 68

.

Summary of Contents for MediaAccess TG789vn

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands