5
5.3. Connect your DWA1230 to your MoCA network
MoCA allows you to interconnect your local MoCA devices (for example, your set-
top box) via your coax network.
MoCA
Proceed as follows:
1
Take a coaxial cable.
2
Connect one end of the coaxial cable to the
MOCA
port on the back of the
DWA1230.
3
Connect the other end of the coaxial cable to the coaxial wall jack or splitter.
6. Check your Internet connection
If the Internet (
@
) LED on the front panel of your DWA1230 is:
•
Green
then your Internet connection is already configured and ready for use. All
devices that are connected to the DWA1230 can now access the Internet.
• If the
@
LED is
red
, proceed with
“7. Configure your DWA1230 to your needs
7. Configure your DWA1230 to your needs (optional)
If you want to make additional changes to the default settings (for example, you want
to change the wireless security settings) of your DWA1230, proceed as follows:
1
Make sure that you have the following information at hand:
Admin Settings
address
Admin User Name
Admin Password
You can find this information on the DWA1230 settings card that is included in
your box or on the bottom label of your DWA1230.
2
Open your Internet browser on a computer or device that is currently connected
to your DWA1230 (either wired or wirelessly). Browse to the
Admin Settings
address.
3
The DWA1230 user interface appears. By default, you are logged in as guest. This
means that some items are hidden. To view all items, click
Sign In
and enter the
Admin User Name
as user name and the
Admin Password
as password.
4
Under
Internet Access
, check the status of your Internet connection. If it is not
connected, click
Internet Access
, enter the
Username
and
Password
for your
Internet connection and then click
Save
.
5
If needed, you can make further changes to the settings but we recommend to
keep the default settings.
For
APPROVAL
and
NOT
for
distribution
outside
Technicolor!!!
