24
Troubleshooting Guide
If the remote control does not work:
• Check that the batteries still have charge and are inserted
correctly.
If there is no picture on the TV and the light on the Digital
Adapter is blinking:
•
Check your cables and make sure that they are attached
correctly.
•
Unplug the Digital Adapter, plug it back in, then wait 5 minutes
for it to reset.
If there is no picture on the TV and the light on the Digital
Adapter is on (
not blinking
):
•
Check that the TV is tuned to the proper channel
(
Ch 3 or Ch 4
).
•
If you are also connected to a VCR, try turning the VCR off.
•
Check that the Digital Adapter is connected directly to the
cable provider outlet in your wall.
•
Make sure that all cables are firmly connected.
•
Check the input setting on your TV, make sure that it is set on
HDMI, ANT or CABLE.
3698674A final4 24
10/5/11 4:38 PM
