background image

P-4

Power Cord Connection

The PSHAKE800 is a powered speaker which means it has the built in amplifier that is able to power its speaker.

To connect the power cord to the PSHAKE800 simply plug female side of the power cord into the power cord input

which is on the rear of the unit. Then plug the male side of the power cord to an electric outlet.

If your outlet is not equipped to handle this type of plug, do not attempt to force the AC power cord into the outlet;

do not alter the plug so that it can fit in the outlet. The only course of action you can take is to find another outlet

which is properly equipped to handle a grounded plug or have an electrician upgrade your electrical outlet. Be sure

that the plug is well connected so that it does not disconnect in the middle of usage. If at any point in time the

supplied AC power cord is punctured or damaged replace it with a new power cord from a local electrician.

NOTE:

-ONLY PLUG IN THE AC POWER CORD WHILE THE UNIT’S POWER IS OFF AND THE VOLUME IS

TURNED DOWN.

-TURNING ON THE UNIT WITH THE VOLUME TURNED UP MAY CAUSE THE UNIT OR ANY

SPEAKERS CONNECTED TO IT TO BE DAMAGED.

-ALWAYS TURN DOWN THE VOLUME PRIOR TO TURNING THE UNIT OFF OR ON.

Audio Input Connections
RCA Inputs

Connecting a Signal Source

The PSHAKE800 has an RCA input jack on the rear of the unit which is designed to receive the signal directly from

your mixer, CD player or any of your other audio sources. To ensure that you have correctly connected your audio

source to the unit, make sure that it has a cable coming from its output and that this cable is plugged into the RCA

Input on the rear of the speaker.

Connecting USB Flash Drive & SD Card Inputs

There are input jacks for a USB flash drive and SD card on the rear panel of PSHAKE800. Simply connect the USB

flash drive or SD card into their respective input jacks and use the input mode selector button to choose the

corresponding input. Be sure that the volume knobs on the PSHAKE800 are turned down at first and then slowly

raise the volume to prevent damage the speakers or any of your other equipment.

PSHAKE800

AUX

AUX

Summary of Contents for PSHAKE800LED







Reviews: