PSHAKE3000
PSHAKE3000 REMOTE CONTROL
1. Standby.
2."0-9" songs select button,to select songs on USB/SD Card,FM only. In USB/SD mode,press those
buttons to select stored songs according to tracks, sequentially short press two or more buttons
one time to select 2 or more digits tracks.In FM mode,press those buttons to select stored station,
sequentially short press two or more buttons one time to select 2 or more digits station stored.
3. Mode (Input) Selector: Use this button to switch between all the inputs.
4. MUTE Key.
5. EQ Mode Button: Press this button to adjust woofer and tweeter sound,and there are 6 pre-set
modes to select.This only work for USB/SD card inputs.
6. In USB / SD Card Mode, Press this button to repeat the current track, all tracks on the USB/SD
Card.The unit's default setup is repeating all tracks. Press repeat the current track, press again
back to default setup.
7.USB/SD mode.
8. Next Track Button: Press this button to go to the beginning of the next track on USB/SD Card
or Bluetooth.Long Press to Fast Forward USB/SD or Bluetooth. In Tuner mode, press this button
to go to the next stored FM station.
9.Previous Track Button: Press this button to go to the beginning of the previous track on USB/SD
Card or Bluetooth inputs.Long Press to Fast Backward USB/SD or Bluetooth input. In Tuner mode,
press this button to go to the previous stored FM station.
10.Play / Pause Button: Short press to pause the signal from the USB/SD card or Bluetooth,FM.
Press again to play.In tuner mode,long press to scan stations. The scan will not pause until the
unit finds a strong enough frequency.
11.MP3 Volume up control.Only control USB/SD/AUX,FM.
12.MP3 Volume down control,Only control USB/SD/AUX,FM.
1
2
3
4
5
6
7
8
9
10
11
12
-
5
-
