MA2020
Input / Output Connections
The MA2020 has one input jack on the rear of the unit which is designed to receive the signal directly
from your DVD, mixer or any of your other 2 Channel signal sources. To ensure that you have correctly
connected your DVD player (other sound sources) to the unit, make sure that the DVD player has a
RCA cord coming from it’s output and that this cord is plugging into the RCA Input on the rear of the
MA2020. Ensure that the polarity of your signal is always maintained by using color coordinated RCA
cables.
Connecting the Signal Source to the MA2020 (DVD/MIXER/MP3 etc.)
The MA2020 is designed to power up to two full-range passive loudspeakers.The speakers should be
connected via the speaker wire outputs on the rear of the MA2020.
Connecting the MA2020 to Passive Loudspeakers
NOTE: WHEN MAKING THESE CONNECTIONS THE POWER OF THE MA2020 AND THE SIGNAL
SOURCE SHOULD ALL BE IN THE OFF POSITION WITH THE VOLUME LEVELS TURNED DOWN.
ONCE THE UNITS ARE ALL POWERED ON, SLOWLY INCREASE THE VOLUME TO AVOID
DAMAGING ANY OF YOUR EQUIPMENT. THE MA2020 OPERATED MOST EFFICIENTLY WHEN
USED WITH 8 OHM SPEAKERS.
There are one ¼" input on the face of the unit which you can plug microphone or line level devices
directly into. To use, simply plug the microphone into the ¼" input while the speaker and microphone
are in the OFF position. Once plugged in, power on the unit and microphone. Once turned on, simply
turn up the Power/Volume (6) to the desired levels.
Connecting Microphones to MA2020
NOTE: BE SURE NOT TO CONNECT AN AMPLIFIER OR ANY AMPLIFIED SIGNAL INTO THE RCA
INPUT JACK. AS THIS COULD DAMAGE THE MA2020. NO OTHER AMPLIFIER IS NEEDED TO
POWER YOUR SIGNAL IN ADDITION TO THE MA2020. ALWAYS MAKE SURE THAT THERE IS
ONLY ONE AMPLIFIER IN THE SIGNAL PATH.
There are also input jack for a MP3 player on the front panel of the MA2020. Just plug the MP3 player
into the MP3 input jack to play signal from MP3 plaer. Be sure that the volume of your MP3 player and
MA2020 are turned down at first and then slowly raise the volume to prevent damaging the speakers
or any of your other equipment.
Adpater, MP3 Cable, Self Adhesive Feet, Screws, User Manual, Warranty.
Accessories
