Input / Output Connections
The EQ5300 has three input jacks on the rear of the unit which is designed to receive the signal directly
from your DVD, mixer or any of your other 2 Channel signal sources. To ensure that you have correctly
connected your DVD player (other sound sources) to the unit ,make sure that the DVD player has a
RCA cord coming from it’s output and that this cord is plugging into the RCA Input on the rear of the
EQ5300. Ensure that the polarity of your signal is always maintained by using color coordinated RCA
cables.
NOTE: BE SURE NOT TO CONNECT AN AMPLIFIER OR ANY AMPLIFIED SIGNAL INTO THE RCA
INPUT JACK. AS THIS COULD DAMAGE THE EQ5300. ALWAYS MAKE SURE THAT THERE IS NO
AMPLIFIER BEFORE EQ5300.
Connecting the Signal Source to the EQ5300 (DVD/MIXER/MP3 etc.)
There are two output jacks on the rear of the unit. The active speakers should be connected via the
speaker wire outputs on the rear of the EQ5300.
Connecting the EQ5300 to Active Loudspeakers
NOTE:
THE SIGNAL FROM THE REC OUTPUT IS A PASSIVE OUTPUT AND CAN NOT BE CONNECTED
DIRECTLY TO A PASSIVE SPEAKER.
EQ5300
