100BASE-T1 MediaConverter USB
User Manual
10
3.2
Installation for Linux
Unzip the downloaded driver pack for Linux. It
contains the device drivers and try application.
Note
: drivers must be installed before the try
application.
3.2.1
Driver Installation
Navigate to the driver folder
\technica-usbbr_linux\linux-technicausbbr-vx.x.x\linux-
technicausbbr-master
and follow instructions in the readme file to install the drivers.
Alternatively, you can follow the instructions here:
Requirements:
DKMS (for automatic kernel module installation). To install DKMS package
execute
sudo apt-get install dkms
.
kernel version v4.12 or higher
Installation:
To install drivers using DKMS, run:
sudo make install-dkms
To uninstall drivers using DKMS, run
sudo make uninstall-dkms
3.2.2
Try Application Installation
Navigate
to
\technica-usbbr_linux\linux-technicausbbr-tray-vx.x.x\linux-
technicausbbr-tray-master
folder to install tray application.
This package provides a tray application to manage Technica Engineering USB
BroadR-Reach converters.
Requirements/Dependencies:
cmake (v3.1 or higher)
gtk+-3.0
libudev
libappindicator
Installation:
If you are using Ubuntu
,
then execute following command to install dependencies:
sudo apt-get install cmake libgtk-3-dev libudev-dev libappindicator3-dev
