INSTRUCTIONS
INSTRUCTIONS
INSTRUCTIONS
INSTRUCTIONS FOR
FOR
FOR
FOR USE
USE
USE
USE
Charging
Charging
Charging
Charging Instructions
Instructions
Instructions
Instructions
The headphones come with a built in rechargeable battery. Before using it for the first time we
recommend you charge the battery fully. Only use the supplied USB Cord to charge the
headphones.
Connect the USB cable to a computer USB port and the USB plug to the charging slot of the
headset. The Red LED illuminates while the headphone is charging. It takes around 3 hours
for the unit to fully charge. When the battery is fully charged the LED will turn blue. When the
battery is low, the LED will flash red and emit three tones every 20 seconds. When this occurs,
please charge the headphones.
Turning
Turning
Turning
Turning on/off
on/off
on/off
on/off the
the
the
the headphones
headphones
headphones
headphones
Power on: Press and hold the
MFB
MFB
MFB
MFB
button for 5~7 seconds until the LED flashes blue.
Power off: Press and hold the
MFB
MFB
MFB
MFB
button for 5~6 seconds until the red LED stops flashing.
In order to save power, the headphones will automatically turn off if no devices are paired after
5 minutes.
Pairing
Pairing
Pairing
Pairing the
the
the
the headphones
headphones
headphones
headphones with
with
with
with Bluetooth
Bluetooth
Bluetooth
Bluetooth devices
devices
devices
devices (phone
(phone
(phone
(phone or
or
or
or music
music
music
music device)
device)
device)
device)
Ensure the headset is turned off, then press and hold the
MFB
MFB
MFB
MFB
button for 5~7 seconds until the
LED flashes red and blue. The device will enter pairing mode when the
blue and red LED
flashes.
Place the headset and Bluetooth device (phone or music device) so that they are no further
than 1 meter apart;
Activate the Bluetooth function on your Bluetooth device (phone or music device). Please refer
to the manufacturer’s instructions for instructions on enabling Bluetooth on your device.
Once you have activated Bluetooth on your device, select the headphones
“BTHP-10”
from
the list of available Bluetooth devices.
If required, enter the password ‘0000’ to confirm & finalize pairing.
Once paired successfully, the LED flashes blue two or three times. It will continue to do this
while paired.
You can now start to use the headphones.
Please note pairing mode on the headphones will last for two minutes. If no devices are paired
within two minutes the headphones will automatically return to standby mode.
If pairing is unsuccessful, turn off the headphones first and then re-pair following the above
steps.
Once you have paired the headphones with a device, the headphones will remember this
device and will pair automatically when the device’s Bluetooth is activated and in range. You
do not need to re-pair any previously connected devices.
The headphones will attempt to automatically connect to the last device it was paired with
when switched on. If you want to pair it with a new device please follow the steps outlined
above.
Once the headphones are paired with your device the music will transmit directly to the
headphones. Please refer to your device’s user manual for further information.
