100BASE-T1 SPY 12 Port
User Manual
15
3.2
System Information Tab
Figure 3-3: Details in System Information Tab
On the tab „System Information“ some status information about the device is
displayed. The user can check the version number of the application firmware and the
bootloader or the unique MAC adress of the device. The version number registers of
the switch and phy chips are displayed for information only.
The MAC adress should be the same as on the label on the bottom of the device.
The IP adress of the host microcontroller (Webserver) can be changed here. If the user
wants to use multiple devices in one network, an unique IP adress for each device must
be set here.
Note
: Before installing a new firmware, please restore the IP Address to the default
one: 192.168.0.49
or restore it by setting it to “default on Control Panel” tab
