1000BASE-T1 SFP MODULE
User Manual
4
guaranteed. In order to set-up the SFP Modules to work in your system, you must be
able to interface via I²C and get in touch with Marvell (the phy manufacturer) to receive
the NDA protected phy-register setting datasheet in order to initialize the phy properly.
In this regard, Technica cannot support, due to NDA restrictions.
One Link LED shows link status.
1.1.1
Features
1000BASE-T1 and SGMII converter
Marvell 88Q2112 A2 PHY
(“IEEE Compliant” or “A0 compatible” mode
settable
via phy register settings)
Fits into a standard SFP slot
Power requirements: 3.3 Volt DC
Supports I2C for internal register access
Master/Slave either via small DIP switch or PHY register settings
Status LEDs
DIP switch for Master/ Slave configuration
1.1.2
General Information
Voltage requirement:
3.3 Volt DC +/- 0.03 Volt
Power consumption:
Standard SFP compliant
Size:
68 x 14 x 14 mm
Weight:
0,1 kg
International Protection:
IP 2 0
Operating temperature:
0 to +70 °Celsius
1.1.3
LINKS
The User can download the latest firmware and documentation for the 1000BASE-T1
SFP Module A2 PHY here:
https://technica-engineering.de/en/produkt/1000BASE-t1-sfp-module/
