100BASE-T1 MediaConverter_BCM
User Manual
6
2
HARDWARE INTERFACES
2.1
Connectors
On the label on top of the device you can see an overview about all HW-Interfaces of
the 100BASE-T1 MediaConverter_BCM.
2.1.1
Black MQS Connector
The pinning of the ECU connectors is listed on the label on top of the device as well.
(See Figure 2
—
1).
The Connector color is black.
The power supply for the device is supplied by pin 1 (12 Volt) and pin 10 (Ground)
Warning
: If you apply a voltage higher than 18 Volt, the device will be damaged!
Figure 2
—
1: Label of 100BASE-T1 MediaConverter_BCM with pinning information
