100/1000BASE-T1 MediaConverter hMTD
User Manual
5
Latency:
(± 0.1 µs) tolerance
Direction
Mode
Latency [µs]
BASE-T1 to Fast Ethernet
100Mbps
1.6
Fast Ethernet to BASE-T1
100Mbps
1.2
BASE-T1 to Ethernet
1Gbps and legacy/IEEE mode
2.5
Ethernet to BASE-T1
1Gbps and legacy/IEEE mode
2.7
Table 1-1: Latency tolerance
1.1.3
LINKS
The user can download the latest firmware and documentation for the 100/1000BASE-
T1 MediaConverter here:
https://technica-engineering.de/en/produkt/100-1000base-t1-mediaconverter-hmtd-
connector/
1.1.4
General operating and safety strategy of Technica
Engineering’s Products
Technica Engineering’s products are designed for operation in automotive systems
and for supply voltages of nominal 12 V or 24 V. The applicable limit, values adhere to
the standard norms for 12 V or 24 V automotive onboard power systems
correspondingly and can be found in the mentioned norms.
Should Technica Engineering’s products be operated in voltage ranges beyond those
specified in the norms, which represents a breach of the conditions of operation, then
this will void the product warranty and Technica Engineering will assume no liability
whatsoever of the results and/or consequences thereof.
This is especially valid whenever the voltage level reaches or exceeds the limits of the
low-voltage directive. In this case, damage to the devices cannot be excluded. Due to
the manufacturing characteristics of the devices, there is no imminent fire hazard from
the device itself, if the devices are being operated in an environment according to the
conditions of use. A secondary fire hazard cannot be excluded, should those conditions
not be met. A protection against overvoltage cannot be provided in such a breach of
the conditions of use.
1.1.5
General design rules for the power supply of Technica
Engineering’s products
The power supply circuit of Technica Engineering’s products are equipped with self-
protection components. This automatic function protects the devices against excessive
