32
Care and Cleaning (continued)
How to remove the filter
4-way semi-concealed type
(CAFP):
1.
Use a screwdriver to remove the bolt screw on each side for the two
latches. (Be sure to reattach the two bolt screws after cleaning.)
2.
Press on the two latches of the air intake grille with your thumbs in the
direction of the arrow to open the grille.
3.
Open the air intake grille downward.
•
When cleaning the air filter, never remove the safety chain. If it is
necessary to remove it for servicing and maintenance inside, be sure
to reinstall the safety chain securely (hook on the grille side) after the
work.
•
When the filter has been removed, rotating parts (such as the fan),
electrically charged areas, etc. will be exposed in the unit’s opening.
Bear in mind the dangers that these parts and areas pose, and
proceed with the work carefully.
4.
Remove the air filter attached to the air intake grille.
Ceiling-mounted type (SPAFP):
1.
Take hold of the finger-hold on the air intake grille and press it to the rear,
and the grille will open downward.
2.
Take hold of the finger-hold on the air filter, pull it toward you.
Wall-mounted type (MAFP):
1.
Move the flap on the air outlet grille to its lowest position with the remote
control unit.
2.
The filter is disengaged by pushing the tab up gently. Hold the air filter by
the tab at the bottom, and pull downward.
When replacing the filter, make sure that the FRONT mark is facing you.
Push it up until you hear it click back into position.
CAUTION
Air intake
grille
Bolt screws
Latch
Safety chain
Air filter
Finger-hold
Air filter
Air filter finger-hold
Air intake grille
Air intake grille
Air filter
OI-722-32-EG
01_Technibel-PACi_EN.fm Page 32 Thursday, December 9, 2004 11:36 AM
