9-2. Remote Control Unit Installation
Position
The remote control unit can be operated from either a
non-fixed position or a wall-mounted position.
To ensure that the air conditioner operates correctly, do
not install the remote control unit in the following places:
●
In direct sunlight
●
Behind a curtain or other place where it is covered
●
More than 8 m away from the air conditioner
●
In the path of the air conditioner's airstream
●
Where it may become extremely hot or cold
●
Where it may be subject to electrical or magnetic
interference
Mounting on a Wall
a) Removable mounting
1) Momentarily hold the remote control unit at the
desired mounting position.
2) Confirm that the air conditioner responds correctly
when you press keys on the remote control from
that position.
3) After confirming correct operation, use a
screwdriver to screw the supplied special
mounting screw into the wall. (Fig.6a)
4) Hang the remote control unit from the mounting
screw.
b) Non-removable mounting
1) Momentarily hold the remote control unit at the
desired mounting position.
2) Confirm that the air conditioner responds correctly
when you press keys on the remote control from
that position.
3) After confirming correct operation, use a
screwdriver to screw the supplied special
mounting screw into the wall. (Fig.6a)
4) Remove the remote control cover by sliding it
downward.
5) Remove the batteries of the remote control unit.
6) Use a screwdriver to screw the remote control unit
securing screw into the wall through the hole in the
battery compartment. (Fig.6b)
7) Replace the batteries.
8) Again confirm that the remote control unit operates
correctly.
19
Wall
Special
mounting
screw
Screw
Wall
Removable mounting
Fig.6b
Non-removable mounting
Fig.6a
