17
Emergency Operation (continued)
MAFM type
Initiate operation using the Emergency operation button in the operation area
of the indoor unit.
•
TEST is used to initiate a trial run when the air conditioner is first installed.
It is not used under normal circumstances.
•
To restart the wireless remote control unit’s operation, the ON/OFF
operation switch must be set to ON without fail. If it is kept at the OFF
setting, the signals from the wireless remote control unit will not be
accepted.
CAFM2V, CAFM1VS type
Initiate operation using the Emergency operation button in the operation area
(inside the indoor unit).
Opeartion
Set the ON/OFF operation switch to “OFF” first.
Then set it to “ON.”
If a heat pump is used, the air conditioner initiates a cooling operation
when its operation is started up at a room temperature of 24°C or above
or it initiates a heating operation when its operation is started up at a room
temperature below 24°C.
ON
OFF
TEST
Shutdown
Set the ON/OFF operation switch to “OFF.”
NOTE
1.
Press the Emergency operation button.
The air conditioner initiates a cooling operation when its operation is
started up at a room temperature of 24°C or above.
Conversely, it initiates a heating operation when its operation is started
up at a room temperature below 24°C.
2.
When the SWING button is pressed, the air direction is automatically
switched from upward to downward or vice versa.
Shutdown
Press the Emergency operation button once more.
OI-729-17-EG
01_OI729_Technibel_ECO-i_EN.fm Page 17 Tuesday, February 7, 2006 2:47 PM
