Take the tilt plate#6 and insert it into round tube
of part#3 and affix it with part “E”.
Take both metal parts #8 and place them
on the other side of the top frame #3 and
affix them with “F” and “J”.
Now take small panel #2 and attach it to
top frame #3 with screws “H”.
3 OF 4
With the main panel #1 upside-down, place
the completed top frame on it, making the holes
on the tilt plate coincide with the set of holes in
the center of the panel, then affix the tilt plate
and the part #7 using screws "I" as shown.
ATTENTION: AS A SAFETY PRECAUTION, REMOVE
ALL OBJECTS FROM THE PRODUCT EVERYTIME
YOU NEED TO ADJUST THE HEIGHT OR THE
ANGLE OF THE ITEM.
Insert the top frame into the middle frame, and after selecting
a desired height, insert the height adjusting knobs “C” into
the holes and tighten them. To adjust the tilt angle of the main
panel, pull the round head knob located behind the tilt plate,
and release it when the desired angle is reached
