P.13
RTA-910TV
P.1
3
•
•
Insert the door
9
into the unit by engaging first the top glides
K
into
the top sliding track
1
2
, then engage the bottom rollers
K
into the
bottom sliding track
1
2
.
Secure the bottom rollers
K
to the door
9
by tightening the screws
from inside the unit.
With the help of another person, use a minimum of 12 nails
M
and a
minimum of 4 junction plates
L
to attach the bottom back panel
10
and
the top back panel
11
to the back side of the unit.
Important
:
• The panels don’t cover the back completely, so make sure to align
and center with all sides.
• Use the plates
L
in between the two panels only.
• Center the nails on the panels, if they go too close to the edge of the
panel, it could split the wood.
• Make sure the nails enter as straight as possible into the panels. If
they go slanted they could split the wood.
(Front
)
(Back)
STEP 15
Hardware:
STEP 16
Hardware:
L
12
to
50
Pcs
M
Junction
plates
4
to
10
Pcs
(NOT INCLUDED)
9
K-
Roller
K-
Glide
N
First insert
top glides
into top track
Then insert bottom
rollers
into bottom track
Last tighten
the screws
from inside the unit
(NOT INCLUDED)
1
2
1
1
1
0
M
Nails
