P.8
RTA-8409
P.8
Assemble the middle panel (I) to the back panel (M) using screws (3) as shown.
Assemble the bottom panel (J) to panel (I) using screws (3), and cover the screws with (10).
Then install the foot panels (L) to the panel (I) as shown (they only connect with the wooden
pins).
Assemble the right panel (H) to the bottom panel (J) using screws (3) and cover the screws
with (10), then install the nail-in plastic glides (11) on the bottom ends of panels (G), (I) and
(H) as shown.
STEP 12
Hardware:
3
M5x40mm x2
10
Screw cap x2
STEP 11
Hardware:
3
M5x40mm x2
(Top)
(Panel I shown from its right side
with its back edge facing down)
(Top)
(T
op)
(Panel J shown from
its underside)
(Same parts as step 10, but
shown from the right)
(Same parts as step 11,
but shown from the left
(Same parts as step 12,
but shown from the right)
(Outside
surface)
STEP 13
Hardware:
3
M5x40mm x2
11
Glides
x6
10
Screw cap x2
(Top)
