P.13
RTA-739DL
P.13
•
•
STEP 1
3
Hardware:
B
Ø15x12
Cam lock
4
Pcs
• If the panels require alignment, push/pull/lift to get them as aligned as
possible with minimal gaps between them.
• Please note that the tops might not end up 100% perfectly aligned, it
should not be of concern unless the difference in levels and gaps are
considerable that will not allow the desk to function properly.
• When all the tops are installed, proceed to tighten all the screws left
loose from step 7 through step 13 inclusive.
•
With the help of another person, carefully place the left tabletop
14
over the left cabinet making sure the bolts and dowels enter into the
holes of panels
18
and
19
.
Insert the cam locks B in panels 18 and 19, and turn them to lock
the tabletop to the side panels.
Secure the tabletop
14
to the tubes
5
and
7
with screws
H
from
underneath, but LEAVE THEM ALL LOOSE to allow flexibility.
H
M6x30
4
Pcs
18
19
5
14
H
B
7
