manualshive.com logo in svg

Techni Mobili RTA-7002, Assembly Instructions Manual

Share
Download
Techni Mobili RTA-7002 Assembly Instructions Manual Download Page 10

P.10

RTA-7002

P.10

First attach the bolts (A) to the panels (10) and (14). Then install the cam locks (A) into           
panels (11), (12), (15) and (16). Then, and as explained in page 4, assemble the front 
panel (10) to panels (11) and (12), and the front panel (14) to panels (15) and (16). Finally, 
install the handles (26) to the front panels (10) and (14) using screws (H) as shown.

Assemble the “L” shaped sliders (24) to the bottom of the drawers using screws (J) as 

shown. Please note the orientation of the sliders: the rollers go towards the back, and they
should not protrude on the bottom, otherwise the drawers raise 3/4” and won’t fit in the unit.

STEP 16

Screws:

A

M6x35mm

8 

sets

H

M4x22mm

4 

pcs

1st

STEP 17

Screws:

J

3x14mm

8 

pcs

ATTENTION:
VERY 
IMPORTANT!

The wheel goes 
towards the back

(Drawers shown upside-
down with front facing away)

3rd

2nd: install 
cam locks

Last

1st

3rd

2nd: install 
cam locks

Last

Summary of Contents for RTA-7002













Reviews:

No comments

Brands by name

Popular brands

Load more brands