Techni Mobili RTA-4602 Assembly Instructions Download Page 2

CHAIR

S FUNCTIONS:

(1) To raise or lower the chair

s height, pull UP the lever that is under the seat. The chair goes down 

while sitting on it, or up if you lift your body.

(2) To make the chair tilt, pull the same lever OUT horizontally to unlock this function, and IN to lock again.

(3) To adjust the tension for the tilting function, turn the mechanism

s knob in either direction to apply more 

or less tension.

WARNINGS:

Do not stand up on the chair or use it as ladder.

Use the chair to seat only one person at a time.

Do not use the chair if parts are damaged or if screws are loose or missing.

Do not seat near the edge of the seat and always sit properly on the chair to avoid going beyond your balance point and fall off the chair.

The chair is intended for teenagers and adults. If small children are using the chair, please keep close observation on them.

Do not allow small children to play with the chair.

Not paying attention to these warnings could result in severe injuries.

CARE AND MAINTENANCE:

To clean the chair it is recommended to use a soft cloth lightly damped in a solution of smooth soap and water, then dry with a clean towel.

Do not use solvents or abrasive materials to clean any part of the chair.

Before applying a cleaning agent, test on a small hidden area of the chair, like underneath the seat.

Do not expose the product to direct sunlight or to extreme environmental conditions.

Every 4 months, inspect the chair completely and make sure that all screws are tighten.  

(1)/(2)

(3)

Reviews: