Techni Mobili ID-2022 Assembly Instructions Download Page 2

CHAIR

S FUNCTIONS:

(1) Chair height: Pull UP the lever that is under the seat. The chair goes down while 

sitting on it, or up if you lift your body.

(2) Chair tilting: Pull the same lever OUT horizontally to unlock this function. While 

unlocked, the chair will tilt freely. When the chair is in the normal position, push 

the lever IN to lock the tilting function.

(3) Tilting tension: Turn the mechanism

s knob in either direction to apply more or 

less tension. With less tension, the tilting will feel more easy.

WARNINGS:

Do not stand up on the chair or use it as ladder.

Use the chair to seat only one person at a time.

Do not use the chair if parts are damaged or if screws are loose or missing.

Do not seat near the edge of the seat and always sit properly on the chair to avoid going beyond your balance point and fall off the chair.

The chair is intended for teenagers and adults. If small children are using the chair, please keep close observation on them.

Do not allow small children to play with the chair.

Not paying attention to these warnings could result in severe injuries.

CUCARE AND MAINTENANCE:

To clean the chair it is recommended to use a soft cloth lightly damped in a solution of smooth soap and water, then dry with a clean towel.

Do not use solvents or abrasive materials to clean any part of the chair.

Before applying a cleaning agent, test on a small hidden area of the chair, like underneath the seat.

Do not expose the product to direct sunlight or to extreme environmental conditions.

Every 4 months, inspect the chair completely and make sure that all screws are tighten.  

(1)

(2)

(3)

Reviews: