6
directly from a switched circuit. This fixture cannot be run on a rheostat or dimmer circuit even if
used solely for a 0% to 100% switching. Before applying power to a fixture, check that the
fixture’s input voltage matches the power source voltage. Consult a qualified electrician if there
are any concerns about proper connection to power.
Mounting
Always consult a qualified professional when rigging. Consider access for routine maintenance
when selecting a mounting position. This fixture may be mounted in any position provided there
is adequate room for movement and ventilation. Mount the fixture securely using the two
mounting holes provided on both sides of the base. This fixture features an adjustable base
which allows the panel to be tilted at different desired angles. Always keep cords out of the way,
thus preventing any trip hazards. Secure all cables properly. Do not mount where the fixture will
be exposed to heavy water fall, high humidity, extreme temperature changes or restricted
ventilation. Do not obstruct any of the heat sink vents.
Basic Reference
Segmented LED Display
Adjustable Bracket
Knobs
Push Buttons
Male XLR 3 and 5
Female XLR 3 and
Pin
Data
Inputs
5
Pin
Data
Outputs
PowerCon Power Input PowerCon Power Thru
Safety Cable Attachment Point Fuse Holder
