Quick Install Guide
USB Type-C Frame Grabber Adaptor UVC-VL-3100
1. Product Overview
2. How to Connect the Adapter
1. Connect the adapter to the camera via the FAKRA connector.
2. Connect the adapter to a computer via the USB Type-C port.
3. The LED indicator will light up when the connection and power are ready.
1
3
2
Note:
Connect to a DC power adapter (10-30V/2A) with the size fit to 2.1x5.5mm plug if the computer you connected doesn’t offer enough power to
activate the adapter. Check the LED indicator status again once the extra power is connected.
Mounting Holes (Bottom Side)
Secures the adapter.
Mounting Holes (Top Side)
Secures the adapter.
Engineering Mode
Updates the firmware.
USB Locking Holes
Secures the USB connector.
USB Type-C Port
Connects to a computer's USB Type-C port.
DC Power Jack
Supports the 2.1 x 5.5mm male plug.
LED Indicator
Lights up when the power is on.
FAKRA Connector
Connects to a camera.
INNOVATORS OF TECHNOLOGY
