3.4
Surface Mounting
There are 10 (TC-1010-APL) / 16 (TC-1560-APL) mounting holes (M4) on the rear side of the device required for surface mounting. M4 screws with at least 6mm
head-to-tip length are required to secure this device.
• All Rights Reserved. No part of this document may be photocopied, reproduced, stored in a retrieval system, or transmitted, in any form or by any means whether, electronic, mechanical, or otherwise
without the prior written permission of TechNexion Ltd.
• No warranty of accuracy is given concerning the contents of the information contained in this publication. To the extent permitted by law no liability (including liability to any person by reason of
negligence) will be accepted by TechNexion Ltd., its subsidiaries or employees for any direct or indirect loss or damage caused by omissions from or inaccuracies in this document.
• TechNexion Ltd. reserves the right to change details in this publication without notice. Please download the most updated version at: https://www.technexion.com/support/download-center/
TC-1010-APL
TC-1560-APL
Phone: +886-2-82273585 Web: www.technexion.com
16F-5, No. 736, Zhongzheng Road, ZhongHe District, 23511, New Taipei City, Taiwan
© 2001-2020 TechNexion Ltd.
2020-01-06
6.2
Serial Ports (RS-XXX1/RS-XXX2)
4
External Connectors
5
LED Light Indicators
6.1
Digital I/O Connector (GPIO)
6
Pin Definition
This product is available with one GPIO connector. The non-galvanic isolated GPIO connector has the following pinout:
The TC-1010-APL / TC-1560-APL has two LED Light indicators. The Power LED Light indicator is lit, when the system is powered on. The SATA LED Light indicator is
blinking, when the SATA SSD is active.
This product is available with two full function non-galvanic isolated RS-232 serial ports:
RS-XXX1 and RS-XXX2. The ports have the following pinout:
Description
No.
No.
Description
1
2
3
4
5
6
12
13
14
15
16
17
7
8
9
10
11
18
19
20
21
22
23
24
25
26
Power LED indicator
Power Input connector
RS-XXX1 (Serial Port) DB9 connector
LAN1 RJ45 connector
LAN2 RJ45 connector
USB Host connector
USB Host connector
miniDP1 connector
miniDP2 connector
SATA LED indicator
Grounding screw M4
Antenna hole
Antenna hole
Antenna hole
Antenna hole
Antenna hole
Antenna hole
Antenna hole
Antenna hole
Power button
USB OTG (Type-C) connector
microSD cardslot
RS-XXX2 (Serial Port) DB9 connector
Micro-SIM cardslot
3.5mm audio jack
GPIO DB15 connector
RS-XXX1:
LED#
Color
ON
OFF
1
Power on
SATA SSD is active (blinking)
Green
Red
Power off
SATA SSD is not active
2
INDICATOR:
6
8
Front view:
Left view:
3
1 2
4 5
7
9
10 11
16
17
18
Rear view:
Right view:
24
23
25 26
19
12
13
14
15
20 21 22
Header on TC-1010-APL / TC-1560-APL: DB9 (9-pin) standard D-Sub male connector.
Cable receptacle: DB9 (9-pin) standard D-Sub female connector.
Header on TC-1010-APL / TC-1560-APL: DB9 (9-pin) standard D-Sub male connector.
Cable receptacle: DB9 (9-pin) standard D-Sub female connector.
Port
Pin # Signal
1
2
3
4
5
7
6
8
9
SERIAL1_DCD
SERIAL1_RXD
SERIAL1_TXD
SERIAL1_DTR
GND
SERIAL1_DSR
SERIAL1_RTS
SERIAL1_CTS
VCC
Description
Device
Port#1 Data Carrier Detect (input)
Port#1 Receive data (input)
Port#1 Transmit data (output)
Port#1 Data Terminal Ready (output)
Ground
Port#1 Data Set Ready (input)
Port#1 Request-to-send (output)
Port#1 Clear-to-send (input)
5V supply output
COM1
COM1
COM1
COM1
COM1
COM1
COM1
The unit is by default preloaded with software that can download and install a selection of Linux OS images over hardwired network. Simply connect a display to the
unit though the miniDP connector and a network through the Ethernet LAN RJ45 connector and power it up, then follow the steps on the screen to load the
software.Local proxies will interfere with this process. For more information, go to our Knowledge Base at: https://www.technexion.com/support/knowledge-base/
To download drivers for the Windows operating systems, go to our Download Center at:
https://www.technexion.com/support/download-center/
For more information about installing and configuring the Windows operating systems, see: https://msdn.microsoft.com/en-us/
7
Software and Driver Installation
3
4
Header on TC-1010-APL / TC-1560-APL: DB15 (15-pin) high density D-Sub male connector.
Cable receptacle: DB15 (15-pin) high density D-Sub female connector.
GPIO:
Port
Pin # Signal
1
2
3
4
5
7
6
8
9
10
11
12
13
14
15
VCC
GPIO1A
GPIO1C
GPIO2A
GPIO2C
GND
GND
GND
GND
GND
VCC
GPIO1B
GPIO1D
GPIO2B
GPIO2D
Description
Voltage
Supply output
DIG_IN2/OUT2
DIG_IN4/OUT4
DIG_IN6/OUT6
DIG_IN8/OUT8
Common Ground
Common Ground
Common Ground
Common Ground
Common Ground
Supply output
DIG_IN3/OUT3
DIG_IN5/OUT5
DIG_IN7/OUT7
DIG_IN9/OUT9
5V
3.3V
3.3V
3.3V
3.3V
5V
3.3V
3.3V
3.3V
3.3V
1
11
6
10
15
5
1
6
9
5
RS-XXX2:
Port
Pin # Signal
1
2
3
4
5
7
6
8
9
SERIAL2_DCD
SERIAL2_RXD
SERIAL2_TXD
SERIAL2_DTR
GND
SERIAL2_DSR
SERIAL2_RTS
SERIAL2_CTS
VCC
Description
Device
Port#2 Data Carrier Detect (input)
Port#2 Receive data (input)
Port#2 Transmit data (output)
Port#2 Data Terminal Ready (output)
Ground
Port#2 Data Set Ready (input)
Port#2 Request-to-send (output)
Port#2 Clear-to-send (input)
5V supply output
COM2
COM2
COM2
COM2
COM2
COM2
COM2
1
6
9
5
