INNOVATORS OF TECHNOLOGY
For more information contact TechNexion sales
www.technexion.com [email protected]
For more information contact TechNexion sales
www.technexion.com [email protected]
2. How to Assemble the Evaluation Kit
1. Remove the antenna away from the PCB board if a Wi-Fi and Bluetooth antenna combo cable is attached. The metal antenna may damage the
PCB or components of the evaluation kit when the power is on.
2.
Insert the plastic snap-lock standoffs into the mounting holes from the rear side of the PCB board.
1
3. Connect the peripherals into the evaluation kit, including a USB mouse, HDMI display, and then connect to the Internet via the RJ45 connector.
4. Connect the 2-pin Micro-Fit 3.0 cable to power up the evaluation kit.
1
2
3
4
2
VCC:DC Voltage input (12V DC)
GND:Ground
ENABLE CANBUS2 TERMINATOR RESISOR
ENABLE CANBUS1 TERMINATOR RESISOR
DISABLE CANBUS2 TERMINATOR RESISOR
DISABLE CANBUS1 TERMINATOR RESISOR
J8
1
3
J5
