The "End" or "Finish" key is used to finish editing
programs or to exit a program. It is also used to
exit a sequence of key operations.
The "Up Arrow" key is used for scrolling up
through the lines on the screen. It is also used to
increase certain fields when editing.
The "Down Arrow" key is used for scrolling down
through the lines on the screen. It is also used to
decrease certain fields when editing.
The "Decimal Point" key is used when editing
numeric fields. It is also used as an Insert key
during program editing to insert additional steps
and other field sets.
The "Delete" key is used during program editing to
delete steps and stages.
The "Pause" key is used during program editing to
insert a pause after a stage or to insert increment
and decrement times and temperatures. It is also
used to pause a program when it is running.
The "Enter" key is used to enter an operation or
the edit mode. It is also used to 'Accept' a field or
program change.
The "Alpha/Numeric" keys are used to enter
numbers and letters during programming. If it is a
numeric field then numbers will be inserted; if it is
an alpha field then letters will be inserted. Each key
will cycle through the letters shown on the key (0
will insert a space). To insert a number, press and
hold the appropriate key.
24
The End, Finish or Exit key
The Up Arrow key
The Down Arrow key
The Decimal Point and Insert key
The Delete key
The Pause key
The Enter or Accept key
The Alpha/Numeric keys
7
pqrs
8
tuv
9
wxyz
0
4
ghi
5
jkl
6
mno
1
2
abc
3
def
THE KEYS
TC412 Techne Manual 19/12/08 3:38 PM Page 26
