The TX-72 wristband indicates the battery charge level as when it is being
charged, (e.g.)
. If not, check whether you charge it in the
correct way and make sure the USB interface is connected in correct way.
The TX-72 wristband can be charged directly via USB (5V). Display turns off
when it is full charged. Standby time is ~10 days (depending on the actual
usage).
Do not try to take out built-in battery. Use the TX-72 charging adapter with the
included Micro USB cable for charging. Keep using and charging the wristband.
Attention:
During charging, Bluetooth of the TX-72 wristband will be turned off
and cannot sync data.
Put on your TX-72 wristband
Wrap the band snugly around your wrist.
Fasten the clasp by pushing the clasp pegs
through the holes in the band.
Wearing hint:
Add a few drops of water to the
holes of the wristband to make closing it
easier.
Changing your TX-72 wristband
1. Remove the TX-72 wristband from your
wrist, and then pull one side of it over the
screen’s frame to remove the complete
module of the TX-72 wristband from the
wristband
2. Fitting of the TX-72 module back into the
wristband works the same way.
Wake up by your TX-72 wristband
1. Tap the touch screen of your TX-72
wristband twice quickly to turn on the screen.
This action is called a Double-Tap. The
screen will automatically turn off after waiting
a few seconds.
2. In order to protect and to operate the TX-72
wristband more effectively, we suggest you
use fingertip, not fingernail.