10
Installation steps
Mark the drill holes by holding the foot of the wall bracket at the desired
mounting location and marking the hole positions.
Use a 6mm drill bit to drill the required holes. Insert the plugs drilled holes in
the wall.
Screw the wall bracket to the wall using the supplied screws.
Mount the camera on the tripod screw and screw the camera a little way on
(about three turns).
Turn the camera in the desired direction and lock it with the lock nut.
To move the camera into its final position, undo the two pivot bolts a little,
position the camera and fix the position by tightening the two pivot bolts.
Connecting to TV
The camera can transfer the video signal to an external monitor or a television.
Follow below instructions to operate:
Connect the camera to the TV via provided AV cable (white = audio; yellow
= video).
Turn on the TV and set it to AV mode.
Turn on the camera; switch the Mode Button to
“Test”.
Once connection is successful, the camera will enter playback mode
and the screen turn black. The image will show on the TV.
Download Files to a computer (2 ways)
Inserting the MicroSD card into a card reader.
Connecting the camera to a computer using the supplied USB cable.
Using a Card Reader
Pop-up the memory card from the camera and insert it into a card reader
adapter. Then connect the card reader to a computer.
Open [My Computer] or [Windows Explorer] and double-click the
removable disk icon that represents the memory card.
Copy image or video files from the memory card to your computer.
Connecting the camera to a PC by the USB Cable
Connect the camera to the computer via USB cable. Switch on the
camera, the screen will display
„
MSDC
”.
Open [My Computer] or [Windows Explorer]. A removable disk appears in
the drive list. Double-click the "Removable Disk" icon to view its contents. All
files are stored in the folder named
„DCIM”.
Copy the photos or files to your computer.
