Functions and Applications
Outdoor Unit Starting Up
Connect to external power to start up. If the power source is only battery, main
MCU is worken about every one second. Sleep mode saves power (Monitor and
alarm functions could be realized in both two power supply conditions.). When
external power and battery supply power simultaneously, the effect is same to
external power supports the unit only, when battery is in low power, the external
power will charge the battery automatically, green LED flashes every one second,
it recovers to its previous state when the battery is full..
Indoor Monitor Starting Up
Plug in 9VDC power, long press “OK” key about 3 seconds to start up (about 1
second after shutdown), logo shall be displayed on screen with a sound of “Beep”.
Turn into standby mode.
■
Display: standby picture, unit ID, signal sign, power sign, time & date
■
Red LED flashes every 4 seconds.
■
In this mode, the screen shall be dimmed after some seconds and turns
into power saving mode.
■
If there is any calling record under this mode, red LED flashes every 1
second and stops flashing after checking.
■
In standby mode, long press “OK key” about 3 seconds, “Shutdown” shall
be displayed on screen with a sound of “Beep”, the unit switches off.
Outdoor Unit Call Indoor Monitor
In standby time mode, press “Door bell key” to call, the blue LED of the outdoor
unit lights up with a sound of “Du Du”. Blue LED of indoor monitor lights up, the
screen shows image and the unit rings for Max. 30 seconds. If there is no reply
signal from indoor monitor, the outdoor unit stops the Call and recall is allowed.
■
Intercom: press “OK” on indoor monitor -
》
ring stop and the unit turns into
intercom mode, red LED of indoor monitor is off as well as blue LED is on,
intercom time is Max. 90seconds.
■
Monitor: press “
” monitor key on indoor monitor-
》
red LED lights up,
monitor outdoor voice without being discovered by the visitors. (One or
both way intercom could be changed over by pressing “
” and “OK”, and
it will time again till 90seconds.).
■
Unlock: in “OK” on-state mode -
》
press “
” unlock key -
》
after
successful unlocking, it shows unlock icon.
■
Take a Photo: in “OK” on-state mode -
》
press “
” photo taking key -
》
one press one photo, the photos will be stored in MicroSD card.
■
Video Recording: in “OK” on-state mode -
》
press “
”video taking key
-
》
start taking video -
》
press “
” video taking key again to stop, the
videos will be stored in MicroSD card.
■
Exit: in “OK” on-state mode -
》
press “OK” key ,the unit turns into standby
mode with a sound of “Beep”.
■
Automatic video: if nobody answers the call in 5 seconds, indoor monitor
starts taking video automatically (Default is automatic video. If setting is
manual video, once connected, the indoor unit will take video manually) till
being stopped or max. taking time.
