Caring for Your Helmet
Clean the headgear with mild soap and water only. The use of any solvents, paints or
decals can cause damage to the helmet and make it ineffective in the result of an
accident.
Keep Helmet Out of Extreme Heat
Helmet will be damaged if exposed to temperatures exceeding 65
C
. Dark vehicles and
storage bags can exceed this on very hot days, heat damaged helmets will have
random disfigured areas where the texture appears bubbly and uneven. If damaged,
helmets should be destroyed and replaced immediately.
Important Information
This headgear is designed to absorb the energy of a blow by partial destruction or
damage itself. Even though such damage may not be visible, the helmet should be
destroyed or replaced, if it is involved in an injury-related fall.
Installation and use
Charge the helmet like shown on image (1)
Charge the remote control like shown on image (2)
1
2
3
4
Your Techni
Helmet is not working after you switch the helmet and Remote control to “on” your
Helmet is still in sleep mode (Battery Safe Mode), this is because no using in 1 week.
Press the reset button on the helmet with a needle as shown in image (3).
All the LED lights on the
helmet flash quickly. At this time, press the reset button the remote control as shown in image (4)
Now the helmet is standby
User Instructions
Remote control
Fix the fastening base on the steering bar with the cable ties.
Turn on the Helmet, press the on/off (5) button: Press the left (1), right (3) or
straight (2) button on remote control.
Turn light left/right:
Press the left (1)/right (3) button if you want to turn left/right. The turn light on the
left/right of the helmet turns on. After 20 seconds the turn light will stop
automatically.
If you would like to stop turn signal manually
press the “straight” button (2).
